CORPUS CHRISTI SOUND & LIGHT
This web site and prices have been updated for 2022 



This page is for DJs only

DJ Sound and Light Support


361-678-1123


or e mail us at

 
***********************************************************************************************

Equipment available for DJ support
Call for prices

All DJ support comes with set up and tear down, wireless mic (Sure blx4 & blx 2 pg58), digital mixer (Mackie dl1608), and dbx Driverack PA2, and onsite tech support the entire night.




MAIN/TOP SPEAKERS QSC KW 153 3 WAY SPEAKERS WITH 1.75" HIGH FEQUENCY  DRIVER, 6.5" MIDRANGE DRIVER AND 15 INCH WOOFER

KW-153
  • Configuration 15" 3-way trapezoidal
  • Transducers
  • Low-frequency: 15" cone transducer
  • Mid-frequency: 6.5" midrange cone transducer
  • High-frequency: 1.75" diaphragm compression driver
  • Frequency Response (-6 dB) 35 Hz - 18 kHz
  • Frequency Range (-10 dB)334 Hz - 20 kHz
  • Nominal Coverage (-6 dB) 75 axisymmetric
  • Maximum SPL1 134 dB peak
Amplifier
  • Power Output2 1000 W Class D (500 W LF, 500 W HF) continuous
  • 2000 W peak
  • Input Impedance (ohms) Channel A XLR / ¼":
  • Mic gain setting : Balanced: Unbalanced
  • 0 dB : 38k : 19k
  • +12 dB : 10k : 5k
  • +24 dB : 2.66k : 1.33k
  • +36 dB : 660 ohms : 330 ohms
  • Channel B XLR / ¼": 38k balanced / 19k unbalanced
  • Channel B RCA: 10k
SUB WOOFERS, QSC KW181 WITH 18 INCH WOOFER

Specifications:
- Configuration: 18-inch subwoofer
- Transducer: 18-inch cone transducer
- Frequency Response (-6 dB): 43 Hz - 97 kHz
- Frequency Range (-10 dB): 39 Hz - 145 Hz
- Maximum SPL (1 meter): 132 dB peak
- Power Output: 1000 W Class D continuous
- Input Impedance (ohms): XLR / 1/4-inch : 38k balanced / 19k unbalanced
- Indicators: Power, Signal, Standby, Limit
- Connectors: Dual balanced female XLR-1/4-inch line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
- Cooling: On demand, 50 mm variable speed fan
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
- Transducer Protection: Thermal limiting, excursion limiting
- AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
- Material: 15 mm painted birch plywood
- Finish: Black textured paint
- Grille: Black powder coated 16 gauge steel
MAIN/TOP SPEAKERS or MONITORS, QSC K12.2 WITH 12 INCH WOOFER

K12.2 Powered 12" 2-Way Loudspeaker System With Advanced DSP Specifications:

Speaker configuration
  • Active/passive: Active
  • Type: 2-way full range
  • LF driver: 12"
  • MF driver: Not applicable
  • HF driver: 1.4"
Power amp (active)
  • Amplifier type: D
  • Wattage: 1,012W continuous; 2,000W peak
  • Mixer/preamp: No
Audio
  • Frequency response: 50Hz–20kHz
  • Coverage pattern: 75° axisymetric
  • Max SPL: 132dB

MAIN/TOP SPEAKERS or MONITORS, QSC K10.2 WITH 10 INCH WOOFER

K10.2 Powered 10" 2-way Loudspeaker System with Advanced DSP Specifications:

Speaker configuration
  • Active/passive: Active
  • Type: 2-way full-range
  • LF driver: 10"
  • MF driver: Not applicable
  • HF driver: 1.4"
Power amp (active)
  • Amplifier type: D
  • Wattage: 1,012W continuous; 2,000W peak
  • Mixer/preamp: No
Audio
  • Frequency response: 56Hz–20kHz
  • Coverage pattern: 90° axisymetric
  • Max SPL: 130dB